Applications:
※Long-term lubrication and noise reduction of plastic gears or sliding parts of automotive electrical components (seat motor regulators).
Performance characteristics:
※Excellent load-carrying capacity and wear resistance, can eliminate noise for a long time;
※Excellent oxidation stability, good compatibility with most plastics and elastomers;
※Good water resistance, shear stability and colloidal stability, extremely long service life.
The main technical parameters:
| project | parameter | Test accuracy | |
| Base oil | PAO | — | |
| Thickener | Lithium soap | — | |
| Base oil viscosity（CST,40℃） | 105 | ASTM D445 | |
| Exterior | Green smooth ointment | Visual inspection | |
| Operating temperature range（℃） | -30～150 | — | |
| Cone penetration 1/10mm | 285-305 | ASTM D217 | |
| NLGIgrade | 1．5 | ASTM D217 | |
| Density 25℃ | 0.91 | ASTM D1480 | |
| Drop point ℃ greater than | 250 | ASTM D2265 | |
| Oil separation 24h 100℃ | <4.5% | FTM 791B,321、2 | |
| Volatility 24h 100℃ | <0.8% | ASTM D972 | |
| Water resistance test 60min 40℃ | <3.5% | ASTM D1264 | |
| Four ball test
(60min 、1200rpm、800N) |
0.528mm（75℃） | ASTM D2266 | |
| —（150℃） | |||
| Four-ball load | 3600N | ASTM D2266 | |
| Low temperature torque（-40℃）N.m | start up | 6．04 | ASTM D1478 |
| Run 10min | 0．96 | ||
| Run 60min | 0．95 | ||
| Antioxidant performance100h、100℃ | 7．5 KPa | ASTM D942 | |
| Antirust test | — | ASTM D1743 | |
（The above data is for reference only and does not have the nature of a contract）
评价
目前还没有评价